SG3525AP
Voltage mode PWM controllers for power management in SOIC packages
Manufacturer： stm
series introduction
# SG3525AP Product Series Introduction
## 1. Overview
The SG3525AP is a highly versatile and widely - used integrated circuit (IC) belonging to the family of pulse - width modulation (PWM) controllers. It is specifically designed for applications in switching power supplies, DC - DC converters, and other power - related circuits. This product series offers a comprehensive set of features that make it an ideal choice for engineers and designers looking to develop efficient and reliable power management solutions.
## 2. Key Features
### 2.1 Precise Pulse - Width Modulation
The SG3525AP provides accurate control over the pulse width of the output signals. This is crucial in power supply applications as it allows for precise regulation of the output voltage and current. By adjusting the duty cycle of the PWM signals, the power delivered to the load can be finely tuned, ensuring stable operation under various load conditions.
### 2.2 Wide Input Voltage Range
It can operate over a relatively wide input voltage range. This flexibility enables it to be used in different power supply designs, whether it's a low - voltage battery - powered system or a high - voltage industrial power supply. The ability to handle a wide range of input voltages makes the SG3525AP suitable for a diverse set of applications.
### 2.3 On - Chip Oscillator
The IC comes with an on - chip oscillator, which simplifies the circuit design. The oscillator frequency can be easily adjusted using an external resistor and capacitor. This allows designers to customize the switching frequency of the power supply according to the specific requirements of the application, such as minimizing electromagnetic interference (EMI) or optimizing efficiency.
### 2.4 Soft - Start Function
The SG3525AP features a soft - start function. When the power supply is turned on, the soft - start circuit gradually increases the output duty cycle over a short period of time. This helps to reduce the inrush current, protecting the components in the power supply from damage and ensuring a smooth startup process.
### 2.5 Over - Current and Over - Voltage Protection
To enhance the reliability of the power supply, the SG3525AP incorporates over - current and over - voltage protection mechanisms. In case of an over - current or over - voltage condition, the IC can quickly shut down the output or reduce the duty cycle to prevent damage to the power supply and the connected load.
### 2.6 Complementary Outputs
It provides complementary output signals, which are useful in push - pull or half - bridge power converter topologies. The complementary outputs ensure that the power switches in the converter are driven in an alternating manner, improving the efficiency and performance of the power supply.
## 3. Technical Specifications
### 3.1 Supply Voltage
The typical supply voltage range for the SG3525AP is from 8V to 35V. This wide range allows it to be used in different power supply configurations, providing designers with more flexibility.
### 3.2 Oscillator Frequency
The oscillator frequency can be adjusted from a few kilohertz to several hundred kilohertz. By selecting appropriate external resistors and capacitors, the switching frequency of the power supply can be optimized for different applications.
### 3.3 Output Current
The output pins of the SG3525AP can source and sink a significant amount of current, typically up to 200mA. This is sufficient to drive most power MOSFETs or bipolar transistors used in power supply circuits.
### 3.4 Operating Temperature Range
The SG3525AP is designed to operate over a wide temperature range, usually from - 40°C to + 85°C. This makes it suitable for use in both industrial and consumer applications, even in harsh environmental conditions.
Images for reference
16 SOIC
Image Preview
Image Preview