MIC23099YFT
Power management ICs for single-cell boost applications
Manufacturer： ['microchip', 'micrel']
series introduction
# MIC23099YFT Product Series Introduction
## 1. Overview
The MIC23099YFT product series represents a cutting - edge solution in the field of power management integrated circuits (PMICs). Developed by a leading semiconductor manufacturer, these devices are engineered to meet the diverse and demanding power requirements of modern electronic systems. With a focus on high efficiency, compact design, and robust performance, the MIC23099YFT series is suitable for a wide range of applications, from portable consumer electronics to industrial control systems.
## 2. Key Features
### 2.1 High - Efficiency Power Conversion
- The MIC23099YFT series utilizes advanced switching regulator technology to achieve high power conversion efficiency. This means that less power is wasted as heat during the conversion process, resulting in longer battery life for portable devices and reduced energy consumption in larger systems. For example, in a typical application, it can achieve efficiency levels of up to 95%, which is significantly higher than many traditional linear regulators.
- The high - efficiency operation also helps in reducing the thermal stress on the device and the surrounding components, enhancing the overall reliability and lifespan of the system.
### 2.2 Wide Input and Output Voltage Ranges
- It supports a wide input voltage range, typically from [minimum input voltage] to [maximum input voltage]. This flexibility allows the MIC23099YFT to be used in various power supply scenarios, whether it is powered by a single - cell battery or a higher - voltage power source.
- The output voltage can be adjusted over a wide range as well, enabling it to provide the exact voltage required by different loads. This makes it suitable for powering a variety of components such as microcontrollers, sensors, and RF modules.
### 2.3 Compact Package Design
- The MIC23099YFT is available in a compact and space - saving package. This is particularly important for applications where board space is limited, such as in smartphones, wearables, and other portable devices. The small form factor allows for more efficient use of the printed circuit board (PCB) area, enabling designers to create more compact and lightweight products.
- Despite its small size, the package is designed to provide good thermal dissipation, ensuring that the device can operate reliably even under high - load conditions.
### 2.4 Low Quiescent Current
- The series features a low quiescent current, which is the current consumed by the device when it is in a standby or low - load state. This is crucial for battery - powered applications, as it helps to conserve battery power during periods of inactivity. For instance, the quiescent current can be as low as [quiescent current value], which is significantly lower compared to some competing products.
### 2.5 Protection Features
- Over - current protection (OCP) is built into the MIC23099YFT to safeguard the device and the connected load from excessive current. In case of a short - circuit or over - load condition, the OCP feature will automatically limit the current to a safe level, preventing damage to the components.
- Over - voltage protection (OVP) ensures that the output voltage does not exceed a predefined safe limit. This protects the sensitive components connected to the output from voltage spikes and surges, enhancing the overall system reliability.
- Thermal shutdown protection is also included. When the device temperature exceeds a certain threshold, the thermal shutdown feature will disable the device to prevent overheating and potential damage.
## 3. Applications
### 3.1 Portable Consumer Electronics
- In smartphones and tablets, the MIC23099YFT can be used to power various subsystems such as the display, camera module, and wireless communication chips. Its high - efficiency power conversion and low qu
Images for reference
MIC23099YFT T5
Image Preview