MC14541BD
14-pin programmable timers for electronic timing applications
Manufacturer： ['rochester', 'onsemi']
series introduction
# Introduction to the MC14541BD Product Series
## 1. Overview
The MC14541BD is a highly versatile and reliable integrated circuit (IC) that belongs to a well - established product series. It is designed to offer precise and programmable timing functions, making it an essential component in a wide range of electronic applications. This IC is part of the 4000 series of CMOS logic devices, which are known for their low power consumption, high noise immunity, and wide operating voltage range.
## 2. Key Features
### 2.1 Programmable Timing
One of the most significant features of the MC14541BD is its programmable timing capability. It can be configured to generate time delays ranging from milliseconds to hours. This is achieved through an internal binary counter and a set of external resistors and capacitors. By adjusting the values of these external components, designers can easily customize the timing intervals according to the specific requirements of their applications.
### 2.2 Low Power Consumption
As a CMOS device, the MC14541BD consumes very little power. This makes it ideal for battery - powered applications where energy efficiency is crucial. The low power consumption also helps in reducing heat generation, which can extend the lifespan of the device and improve the overall reliability of the system.
### 2.3 High Noise Immunity
The MC14541BD has excellent noise immunity, which means it can operate reliably in noisy electrical environments. This is due to the inherent characteristics of CMOS technology, which provides a high noise margin. As a result, the device is less likely to be affected by electrical interference, ensuring stable and accurate timing performance.
### 2.4 Wide Operating Voltage Range
The IC can operate over a wide voltage range, typically from 3V to 18V. This flexibility allows it to be used in a variety of power supply configurations, making it suitable for different types of electronic systems. Whether it is a low - voltage portable device or a higher - voltage industrial application, the MC14541BD can adapt to the power requirements.
### 2.5 Reset Function
The MC14541BD is equipped with a reset function. This allows the user to restart the timing cycle at any time, providing greater control over the operation of the device. The reset input can be used to synchronize the timing with other components in the system or to respond to specific events.
## 3. Pin Configuration
The MC14541BD is available in a standard 16 - pin dual - in - line package (DIP) or a surface - mount package. The pin configuration is designed to be user - friendly and easy to interface with other components. Here is a brief description of the main pins:
- **VDD and VSS**: These are the power supply pins. VDD is connected to the positive supply voltage, and VSS is connected to the ground.
- **OSC1 and OSC2**: These pins are used to connect the external resistor and capacitor for setting the timing frequency.
- **RESET**: This pin is used to reset the internal counter and start a new timing cycle.
- **Q**: This is the output pin. It provides the timing signal according to the programmed delay.
## 4. Applications
### 4.1 Consumer Electronics
In consumer electronics, the MC14541BD can be used in devices such as timers for household appliances. For example, it can be used to control the operation time of a microwave oven, a coffee maker, or a fan. It can also be used in toys and games to create timed events or delays.
### 4.2 Industrial Automation
In industrial automation systems, the MC14541BD is used for process control and monitoring. It can
Images for reference
14-SOIC
14-TSSOP
Image Preview