IHLP2525CZER2R2M01

Shielded high-current wirewound SMD inductors, 2.2 µH, 8-14A

Manufacturer: ['vishay', 'dale']

series introduction

# IHLP2525CZER2R2M01 Product Series Introduction

## 1. Overview
The IHLP2525CZER2R2M01 belongs to a high - performance inductor product series. Inductors are fundamental passive components in electronic circuits, and this particular series is designed to meet the demanding requirements of modern electronic applications. These inductors play a crucial role in energy storage, filtering, and impedance matching, making them essential for the proper functioning of a wide range of electronic devices.

## 2. Physical Characteristics
### 2.1 Dimensions
The "2525" in the product code indicates the package size. The IHLP2525CZER2R2M01 has a compact and standardized form factor, with a length and width of approximately 25mm x 25mm. This relatively small size makes it suitable for use in space - constrained printed circuit board (PCB) designs, allowing for high - density component placement.
### 2.2 Construction
It features a robust construction with a magnetic core and a wound coil. The core material is carefully selected to provide high magnetic permeability, which enhances the inductor's performance. The coil is wound with high - quality conductive wire, ensuring low resistance and efficient energy transfer. The overall construction is designed to withstand mechanical stress, temperature variations, and environmental factors, providing long - term reliability.

## 3. Electrical Specifications
### 3.1 Inductance
The "2R2" in the product code represents the inductance value. The IHLP2525CZER2R2M01 has an inductance of 2.2μH (microhenries). Inductance is a measure of the inductor's ability to store energy in a magnetic field when an electric current flows through it. This specific inductance value is suitable for a variety of applications, such as power supply filtering and DC - DC converters.
### 3.2 Tolerance
The "M" in the product code indicates the tolerance of the inductance value. In this case, the tolerance is ±20%. This means that the actual inductance of the inductor can vary within 20% of the specified 2.2μH value. While a relatively wide tolerance, it is still acceptable for many general - purpose applications where precise inductance values are not critical.
### 3.3 DC Resistance (DCR)
The DC resistance of the IHLP2525CZER2R2M01 is an important parameter as it affects the power loss in the inductor. A low DCR is desirable as it reduces the amount of power dissipated as heat. The specific DCR value for this inductor is carefully optimized to balance performance and cost, ensuring efficient operation in power - related applications.
### 3.4 Saturation Current
The inductor has a defined saturation current rating. Saturation occurs when the magnetic core of the inductor can no longer store additional magnetic energy, and the inductance value starts to decrease significantly. The IHLP2525CZER2R2M01 is designed to handle a certain maximum saturation current, which is specified in the product datasheet. This rating is crucial for applications where high - current handling is required, such as in power supplies for high - power electronic devices.

## 4. Performance Advantages
### 4.1 High - Frequency Performance
The IHLP2525CZER2R2M01 is engineered to perform well at high frequencies. It has low parasitic capacitance and resistance, which minimizes signal losses and interference at high - frequency operation. This makes it suitable for use in high - speed communication systems, such as wireless routers, mobile devices, and high - frequency power converters.

Images for reference

IHLP 0.270"L x 0.255" W

IHLP 0.270"L x 0.255" W

IHLP 0.270"L x 0.255" W

IHLP 0.270"L x 0.255" W

IHLP2525CZER Series Footprint

IHLP2525CZER Series Footprint

Datasheets

Partlist

IHLP2525CZER2R2M01