Surface-mount thick film resistors, 100KOhms, 0.1W, 1% tolerance
Manufacturer: tyco
# Introduction to the CRG0603F100K Product Series
## 1. Overview
The CRG0603F100K product series belongs to the realm of electronic components, specifically resistors. These resistors play a fundamental and crucial role in a wide range of electronic circuits, where they are used to control current flow, divide voltages, and terminate transmission lines, among other functions. The "CRG" is the product family identifier, "0603" refers to the package size, "F" indicates the tolerance level, "100" represents the resistance value, and "K" is the multiplier.
## 2. Package Size (0603)
### Physical Dimensions
The 0603 package is a surface - mount device (SMD) package. It has standardized dimensions that are widely recognized in the electronics industry. Typically, a 0603 package has a length of approximately 0.06 inches (1.6 mm) and a width of about 0.03 inches (0.8 mm). This relatively small size makes it suitable for use in compact electronic devices where space is at a premium, such as mobile phones, tablets, and wearable devices.
### Advantages of the Package
- **Space - Saving**: As mentioned, the small size allows for high - density circuit board designs. Multiple CRG0603F100K resistors can be placed in a limited area, enabling the development of more miniaturized and lightweight electronic products.
- **Automated Assembly**: The 0603 package is well - suited for automated pick - and - place machines used in mass production. This leads to increased manufacturing efficiency and reduced production costs.
## 3. Resistance Value (100K)
### Meaning of the Value
The resistance value of 100K (100,000 ohms) is a common and useful value in electronic circuits. It can be used in various applications such as biasing transistors, setting gain in amplifier circuits, and as part of voltage - dividing networks.
### Applications Based on Resistance
- **Biasing in Transistors**: In a transistor amplifier circuit, a 100K resistor can be used to set the proper DC operating point (bias) of the transistor. This ensures that the transistor operates in the desired region (e.g., the active region) for proper signal amplification.
- **Voltage Dividers**: When combined with other resistors, a 100K resistor can be used to divide a voltage source into smaller, more usable voltages. For example, in a power supply circuit, it can be used to provide a reference voltage for other components.
## 4. Tolerance Level (F)
### Tolerance Definition
The "F" tolerance level indicates a tolerance of ±1%. This means that the actual resistance value of a CRG0603F100K resistor can vary by up to 1% from the nominal value of 100K ohms. In other words, the actual resistance can range from 99K ohms (100K - 1%) to 101K ohms (100K+ 1%).
### Importance of Tolerance
- **Precision Circuits**: In applications where precise resistance values are required, such as in precision measurement equipment, audio amplifiers, and some communication circuits, a low - tolerance resistor like the CRG0603F100K is essential. A tight tolerance ensures that the circuit operates as designed and provides accurate and consistent performance.
- **Matching Resistors**: In circuits where multiple resistors need to be matched, such as in differential amplifier circuits, the ±1% tolerance helps to minimize the mismatch between resist
Image Preview
Image Preview
Image Preview