High-speed CMOS octal inverting latches with 3-state outputs
Manufacturer: ['rochester', 'ti']
# Introduction to the CD54HCT533F3A Product Series
## 1. Overview
The CD54HCT533F3A belongs to a specialized product series within the realm of integrated circuits. These integrated circuits are designed to meet specific digital logic requirements in a wide range of electronic applications. The "54" in the part number often indicates a military - grade or high - reliability version, which implies enhanced performance and durability under various environmental conditions compared to commercial - grade counterparts. The "HCT" stands for High - Speed CMOS Technology, which combines the advantages of high - speed operation and low power consumption, making it suitable for modern digital systems.
## 2. Key Features
### 2.1 Logic Functionality
The CD54HCT533F3A is an octal D - type transparent latch with 3 - state outputs. This means it can store eight bits of data simultaneously. The D - type latch operates based on the principle that when the latch enable (LE) input is high, the output follows the input data. When the LE input goes low, the output retains the last data value that was present at the input when the LE transitioned from high to low. The 3 - state outputs provide an additional level of flexibility. In the high - impedance state, the outputs effectively disconnect from the circuit, allowing multiple devices to share a common bus without interfering with each other.
### 2.2 High - Speed Operation
Thanks to the HCT technology, the CD54HCT533F3A offers high - speed data transfer capabilities. It can handle fast - changing digital signals, which is crucial in applications where real - time data processing is required. The propagation delay, which is the time it takes for a signal to travel from the input to the output, is relatively short. This enables the device to keep up with the high - speed clock signals commonly used in modern microprocessors and digital communication systems.
### 2.3 Low Power Consumption
CMOS technology inherently consumes less power compared to other logic families. The CD54HCT533F3A is no exception. It has a low quiescent current, which means it draws minimal power when in a static state. This is especially important in battery - powered devices or applications where power efficiency is a top priority. The low power consumption also helps in reducing heat generation, which can improve the overall reliability and lifespan of the device.
### 2.4 Wide Operating Voltage Range
The CD54HCT533F3A can operate over a relatively wide voltage range. This allows it to be used in different power supply environments. For example, it can typically operate within a voltage range of 2V to 6V. This flexibility makes it compatible with a variety of digital systems that may have different power supply requirements.
### 2.5 High Noise Immunity
The device has good noise immunity, which means it can tolerate a certain amount of electrical noise without malfunctioning. This is important in real - world applications where electrical interference is common. The high noise immunity helps ensure the integrity of the data being processed and transferred, reducing the likelihood of errors in the digital system.
## 3. Package and Pin Configuration
### 3.1 Package Types
The CD54HCT533F3A is available in different package types. Common packages include the plastic dual - in - line package (PDIP), which is a through - hole package that is easy to mount on printed circuit boards (PCBs) using traditional soldering techniques. Another popular option is the small - outline integrated circuit (SOIC) package, which is a surface - mount package. Surface - mount packages are more suitable for high - density PCB designs as they take up less board space.
### 3.2 Pin Configuration