Quad 2-input NAND gate ICs in 14-pin SOIC package
Manufacturer: ['rochester', 'analog-devices', 'ti']
# CD4011UBM96 Product Series Introduction
## 1. Overview
The CD4011UBM96 is a highly versatile and widely used integrated circuit (IC) product series that belongs to the 4000 series of CMOS logic devices. These ICs are designed to perform basic digital logic functions, specifically the NAND gate operation. The "CD" in the part number typically indicates a product from Texas Instruments or other manufacturers following a similar naming convention, while "4011" designates the specific logic function (quad 2 - input NAND gates), "U" often implies a standard CMOS technology, "BM" might refer to a specific package type or manufacturing process, and "96" could be a version or lot - related identifier.
## 2. Key Features
### 2.1 Logic Functionality
- **Quad 2 - Input NAND Gates**: Each CD4011UBM96 IC contains four independent 2 - input NAND gates. A NAND gate is a fundamental digital logic gate whose output is the logical negation of the AND operation of its inputs. That is, the output is low (logic 0) only when both of its inputs are high (logic 1); otherwise, the output is high. This functionality makes it suitable for a wide range of digital circuit designs, such as building more complex logic circuits, implementing Boolean functions, and performing signal inversion and combination.
- **High - Speed Operation**: The CD4011UBM96 offers relatively fast switching speeds, which allows it to handle high - frequency digital signals. This is crucial in applications where quick response times are required, such as in digital communication systems and high - speed data processing circuits.
### 2.2 Electrical Characteristics
- **Wide Supply Voltage Range**: It can operate over a wide range of supply voltages, typically from 3V to 18V. This flexibility makes it compatible with various power sources and different levels of system voltages, enabling its use in a diverse set of electronic devices.
- **Low Power Consumption**: As a CMOS device, the CD4011UBM96 consumes very low power, especially in standby or static states. This is an important advantage in battery - powered applications, where power efficiency is a critical factor for extending the battery life of the device.
- **High Input Impedance**: The high input impedance of the CD4011UBM96 means that it draws very little current from the driving source. This property reduces the loading effect on the previous stage of the circuit, allowing multiple CD4011UBM96 gates to be connected to a single signal source without significantly degrading the signal quality.
### 2.3 Package and Physical Characteristics
- **Small - Sized Package**: The CD4011UBM96 is available in a compact package, which saves board space and is suitable for applications where miniaturization is required, such as in portable electronic devices and printed circuit board (PCB) designs with limited space.
- **Good Thermal Performance**: The package design also provides good thermal dissipation characteristics, ensuring that the IC can operate within a safe temperature range even under continuous operation or in high - ambient - temperature environments.
## 3. Applications
### 3.1 Digital Logic Design
- **Boolean Function Implementation**: Engineers can use the CD4011UBM96 to implement various Boolean functions by combining multiple NAND gates. For example, any other logic gate (AND, OR, NOT, etc.) can be constructed using only NAND gates. This property makes the CD4011UBM96 a fundamental building block in digital circuit design, from simple combinational logic circuits to complex sequential logic circuits.
- **Logic Level Conversion**: It can be used to convert logic levels
14-SOIC
14-TSSOPa
Image Preview