C1210C225K5RAC7800

2.2uF 50V capacitors for electronic circuits

Manufacturer: kemet

series introduction

# Introduction to the C1210C225K5RAC7800 Product Series

## Overview
The C1210C225K5RAC7800 product series represents a cutting - edge range of electronic components designed to meet the diverse and demanding requirements of modern electronic systems. These components are engineered with precision and incorporate advanced technologies to ensure high performance, reliability, and compatibility across a wide spectrum of applications.

## Product Nomenclature Breakdown
Let's dissect the product code "C1210C225K5RAC7800" to understand its key features:
- **C1210**: This typically refers to the physical size or form factor of the component. In the context of electronic components like capacitors, the "1210" often follows a standard industry sizing convention. For example, in the case of surface - mount devices, it might represent the length and width dimensions in inches (120 mils by 100 mils), which is equivalent to 3.2mm by 2.5mm. This size is a common choice for many applications as it offers a good balance between component density on a printed circuit board (PCB) and electrical performance.
- **C**: Usually, the letter "C" indicates that the component is a capacitor. Capacitors are fundamental electronic components that store and release electrical energy, and they play crucial roles in filtering, coupling, and energy storage in electronic circuits.
- **225**: This number is related to the capacitance value of the capacitor. In the capacitor naming system, the first two digits are significant figures, and the third digit is the multiplier. So, for "225", the significant figures are 22, and the multiplier is \(10^5\). The capacitance value is calculated as \(22\times10^5\) picofarads (pF), which is equal to 2.2 microfarads (\(\mu F\)).
- **K**: The letter "K" represents the tolerance of the capacitance value. In the capacitor industry, "K" typically means a tolerance of ±10%. This indicates that the actual capacitance of the component can vary by up to 10% from the nominal value (in this case, 2.2 \(\mu F\)).
- **5RAC**: This part of the code may be specific to the manufacturer and could denote additional features such as the type of dielectric material used, the voltage rating, or the construction technology. For example, the dielectric material can significantly affect the capacitor's performance characteristics like temperature stability, leakage current, and equivalent series resistance (ESR).
- **7800**: This is likely a unique identifier assigned by the manufacturer for internal tracking, version control, or to distinguish specific product variants within the series.

## Key Features

### High Capacitance
With a capacitance value of 2.2 \(\mu F\), the C1210C225K5RAC7800 series capacitors can store a relatively large amount of electrical charge. This makes them suitable for applications where significant energy storage is required, such as power supply filtering. In power supplies, they can smooth out the DC voltage by absorbing and releasing energy to reduce voltage ripple, ensuring a stable power output to the connected electronic devices.

### Tolerance
The ±10% tolerance provides a reasonable balance between cost and performance. In many applications, a 10% variation in capacitance is acceptable, allowing for cost - effective design solutions. However, for applications that require extremely precise capacitance values, such as in some high - frequency oscillators or precision measurement circuits, additional calibration or selection of components with tighter tolerances may be necessary.

### Physical Size
The 1210

Partlist

C1210C225K5RAC7800