2SD2662
NPN bipolar transistors, 30V 1.5A, for general electronic use
Manufacturer： rohm
series introduction
# Introduction to the 2SD2662 Product Series
## 1. Overview
The 2SD2662 product series belongs to the realm of semiconductor devices, specifically power transistors. These transistors are engineered to handle significant electrical power, making them suitable for a wide range of applications in the electronics industry. Their design and performance characteristics are optimized to meet the demanding requirements of modern electronic circuits, providing reliable and efficient operation.
## 2. Key Features
### 2.1 High Power Handling Capability
One of the most prominent features of the 2SD2662 series is its ability to handle high power levels. These transistors can dissipate large amounts of heat generated during operation, which is crucial for applications where high - current and high - voltage conditions are present. This high - power handling capacity allows them to be used in power supply circuits, audio amplifiers, and motor control systems, where they can efficiently manage the flow of electrical energy without overheating.
### 2.2 Low Saturation Voltage
The 2SD2662 transistors exhibit a low saturation voltage. When the transistor is in the saturated state (fully on), a low saturation voltage means that there is less power loss across the device. This not only improves the overall efficiency of the circuit but also reduces the amount of heat generated, leading to a more reliable and long - lasting operation. In power - conversion applications, such as DC - DC converters, the low saturation voltage helps to minimize energy losses and increase the conversion efficiency.
### 2.3 Fast Switching Speed
Fast switching speed is another important characteristic of the 2SD2662 series. In applications where the transistor needs to turn on and off rapidly, such as in pulse - width modulation (PWM) circuits, a fast switching speed ensures that the transistor can accurately follow the input signal. This results in better control of the output power and reduced electromagnetic interference (EMI). The fast switching capability also makes these transistors suitable for high - frequency applications, where they can operate efficiently at frequencies in the range of several kilohertz to megahertz.
### 2.4 High Current Gain
The transistors in the 2SD2662 series have a relatively high current gain. This means that a small input current can control a much larger output current. In amplifier circuits, a high current gain allows for efficient signal amplification, enabling the circuit to produce a large output signal with a relatively small input signal. It also simplifies the design of the driving circuit, as less current is required from the input source to drive the transistor.
## 3. Electrical Specifications
### 3.1 Collector - Emitter Voltage (VCEO)
The collector - emitter voltage rating of the 2SD2662 series is typically in the range of several tens of volts. This voltage rating determines the maximum voltage that the transistor can withstand between its collector and emitter terminals without breakdown. A higher VCEO rating makes the transistor suitable for applications where high - voltage signals are present, such as in power supply circuits and high - voltage amplifiers.
### 3.2 Collector Current (IC)
The collector current rating indicates the maximum current that the transistor can handle continuously through its collector terminal. The 2SD2662 series can handle collector currents in the range of several amperes. This high - current handling capability makes it suitable for applications such as motor control, where large currents are required to drive the motor.
### 3.3 Power Dissipation (PD)
The power dissipation rating of the 2SD2662 transistors is an important parameter that determines the maximum amount of power that the device can dissipate as heat. It is typically specified in watts. A higher power dissipation rating allows the transistor to operate in high - power applications without overheating. To ensure proper operation, it is often necessary to use
Images for reference
SC-62_MPT3
SOT-89 Package Top
Image Preview