2SA970

General-purpose PNP transistors in compact TO-92 packages

Manufacturer: ['magnatec', 'blue-rocket', 'toshiba']

series introduction

# Introduction to the 2SA970 Product Series

## 1. Overview
The 2SA970 is a well - known and widely used product series in the field of semiconductor devices, specifically belonging to the category of PNP bipolar junction transistors (BJTs). These transistors play a crucial role in a variety of electronic circuits, offering reliable performance and specific electrical characteristics that make them suitable for numerous applications.

## 2. Physical Characteristics
### Package Type
The 2SA970 transistors are typically available in a TO - 92 package. This is a common through - hole package that is easy to handle and mount on printed circuit boards (PCBs). The TO - 92 package has three leads: the emitter, base, and collector. Its compact size allows for efficient use of PCB space, making it ideal for both small - scale and large - scale electronic designs.

### Dimensions
The TO - 92 package has standard dimensions. The body length is approximately 4.7mm, the width is around 4.2mm, and the height is about 5.2mm. The lead pitch is 2.54mm, which is a standard pitch for through - hole components, facilitating easy soldering and compatibility with standard PCB layouts.

## 3. Electrical Characteristics

### DC Current Gain (hFE)
One of the key electrical parameters of the 2SA970 is its DC current gain. The hFE value typically ranges from 120 to 400. This relatively high current gain allows the transistor to amplify small input currents into larger output currents, making it suitable for applications such as audio amplification. For example, in a simple audio amplifier circuit, a small audio signal can be used to control the base current of the 2SA970, and the transistor will then amplify this current to drive a speaker.

### Collector - Emitter Voltage (VCEO)
The 2SA970 has a collector - emitter voltage rating (VCEO) of around - 50V. This means that the transistor can withstand a maximum reverse voltage of 50V between the collector and the emitter without breakdown. This voltage rating makes it suitable for use in circuits where moderate voltage levels are present, such as in power supply circuits or low - voltage amplifier stages.

### Collector Current (IC)
The maximum collector current (IC) that the 2SA970 can handle is approximately - 500mA. This current - handling capacity enables the transistor to drive relatively high - power loads in certain applications. For instance, it can be used in circuits that need to control small motors or power LEDs.

### Power Dissipation (PD)
The power dissipation rating (PD) of the 2SA970 is about 625mW. This indicates the maximum amount of power that the transistor can dissipate as heat without getting damaged. When designing circuits with the 2SA970, it is important to ensure that the power dissipated by the transistor does not exceed this rating to prevent overheating and potential failure.

## 4. Applications

### Audio Amplification
As mentioned earlier, the high DC current gain of the 2SA970 makes it an excellent choice for audio amplifier circuits. It can be used in both single - stage and multi - stage audio amplifiers to boost the audio signal strength. For example, in a simple guitar amplifier circuit, the 2SA970 can be used in the pre - amplifier stage to amplify the weak signal from the guitar pickup before it is further processed and amplified by other stages.

### Signal Switching
The 2SA970 can also be used as a signal switch in electronic circuits. By applying a suitable control signal to the base of the transistor, it can be turned on or off,

Datasheets

Partlist

2SA970
2SA970BL
2SA970-BLTE2FT
2SA970-BLTPE2F