2N7002KT1G

N-channel MOSFETs in SOT-23 package for small signal applications

Manufacturer: ['siliconix', 'onsemi', 'lrc']

series introduction

# Introduction to the 2N7002KT1G Product Series

## 1. Overview
The 2N7002KT1G is a significant member of the MOSFET (Metal - Oxide - Semiconductor Field - Effect Transistor) product series. MOSFETs are crucial semiconductor devices widely used in modern electronic circuits due to their high efficiency, fast switching speeds, and low power consumption characteristics. The 2N7002KT1G, in particular, offers a set of features that make it suitable for a variety of applications across different industries.

## 2. Key Specifications

### Electrical Characteristics
- **Voltage Ratings**:
- The 2N7002KT1G typically has a drain - source breakdown voltage ($V_{DSS}$) of around 60V. This voltage rating determines the maximum voltage that the device can withstand between the drain and source terminals without breaking down. It allows the transistor to be used in circuits where relatively high - voltage signals are present, such as in some power supply and motor control applications.
- The gate - source voltage ($V_{GS}$) has a maximum rating, usually around ±20V. This specification is important as it defines the safe operating range for the voltage applied to the gate terminal, which controls the flow of current between the drain and source.
- **Current Ratings**:
- The continuous drain current ($I_{D}$) is an important parameter. For the 2N7002KT1G, it can handle a continuous drain current of up to several hundred milliamperes (e.g., around 200 - 300 mA depending on the operating conditions). This current - handling capacity makes it suitable for driving small - to medium - sized loads, such as LEDs, small relays, and some low - power integrated circuits.
- The pulsed drain current ($I_{DM}$) is higher than the continuous drain current. It can handle short - duration high - current pulses, which is useful in applications where sudden current spikes occur, like in switching power supplies during the turn - on and turn - off transients.

### On - Resistance ($R_{DS(on)}$)
The on - resistance is a critical characteristic of a MOSFET. For the 2N7002KT1G, the on - resistance is relatively low, typically in the range of a few ohms (e.g., around 2 - 5 ohms at a specified gate - source voltage and drain current). A low on - resistance means that when the MOSFET is in the on - state, there is less power dissipated as heat, resulting in higher efficiency. This is especially important in power - management applications where minimizing power loss is crucial.

### Threshold Voltage ($V_{GS(th)}$)
The threshold voltage is the minimum gate - source voltage required to turn on the MOSFET. For the 2N7002KT1G, the threshold voltage is typically in the range of 1 - 2V. This relatively low threshold voltage allows the MOSFET to be easily controlled by low - voltage signals, such as those from microcontrollers or other low - power logic circuits.

## 3. Package and Physical Characteristics
- **Package Type**: The 2N7002KT1G is commonly available in a small - sized surface - mount package, such as the SOT - 23. The SOT - 23 package is widely used in modern electronics due to its compact size, which is beneficial for printed circuit board (PCB) design, especially in applications where space is limited, such as in mobile devices, wearable electronics, and small - form - factor consumer products.
- **Thermal Performance**: The package design also affects the thermal performance of the device.

Images for reference

SOT-23-3_527AG

SOT-23-3_527AG

Image Preview

Image Preview

Image Preview

Image Preview

related Documents

Datasheets

Partlist

2N7002KT1G
2N7002KT1GE3